Page 1 of 1
Hikouki Kanna - Blade Prep
Posted: Thu Aug 04, 2016 8:14 am
by Brian
Morning! With the butler's desk now winding down (a few things left to complete), I've had a moment to begin preparing a new tool for the shop. I'd like to start building Shoji and so I have acquired a new kanna with designs on turning it into a Hikouki kanna.
https://brianholcombewoodworker.com/201 ... lade-prep/
I look forward to your comments.
Cheers
Brian
Re: Hikouki Kanna - Blade Prep
Posted: Thu Aug 11, 2016 9:13 am
by Brian
Re: Hikouki Kanna - Blade Prep
Posted: Sun Aug 21, 2016 5:31 am
by Vips
That Kanna looks perfect now!
For my kumiko work, I have been using jigs to dimension the stock, but I have been considering some sort of attachment cradle for a kanna which may merit more accurate results.
Tomohito-san did point me towards a hikouki-kanna, but they are prohibitively expensive for my requirements right now.
I look forward to your modifications.
Re: Hikouki Kanna - Blade Prep
Posted: Sun Aug 21, 2016 8:47 am
by Brian
Thank you! I should have something worthwhile to post in a few weeks. I decided to leave that dai alone and so I cut another to use as the hikouki Kanna. I couldn't bring myself to operate on that newly setup dai, lol.
Re: Hikouki Kanna - Blade Prep
Posted: Thu Sep 01, 2016 10:43 am
by Brian
Good morning! Now that Kez is complete I'm back at it with he Hikouki kanna, now mostly completed and soon to be ready for testing.
I hope enjoy my post and look forward to your comments.
https://brianholcombewoodworker.com/201 ... and-track/