Rosewood Handles
- Chris Hall
- Site Admin
- Contact:
- Location: Greenfield, Massachusetts
Post
Re: Rosewood Handles
I have a couple of pieces of Australian buloke (bull oak - not actually an oak mind you), the hardest wood in the world, that I am keeping aside to use for hammer handles someday. Not sure how well that wood will work in that regard, but it will be interesting to try out.
- nyamo_iaint
- Raw Log Import
- Location: Sydney, Australia
Post
Re: Rosewood Handles
Thanks for your replies everyone.
Derek's (Yxoc) hopper-based house sign also used a casuarina, and I recall him saying it was a bit crumbly. There are so many different ones though that the properties could be completely different.
Iain
Quite likely. As I'm likely to buy it from him I'll ask him at the time, although my quick and dirty research seems to suggest that Gadge's recommendation of spotted gum is spot on. It seems to be the go-to Australian wood for tool handles as it is strong and resistant to shocks.Brian wrote:I suspect So Yamashita would know which woods to use for this endeavor, being that he is located in Australia.
Ah yes, Australian tree naming... I have a small block of WA She Oak (still not an oak, but from WA, and possibly a she given some members of allocasuarina are single sex trees). It is about the right shape for a kanna dai, whether or not it's appropriate for that is another matter. But I think it will be several years before I get to that.Chris wrote:I have a couple of pieces of Australian buloke (bull oak - not actually an oak mind you), the hardest wood in the world, that I am keeping aside to use for hammer handles someday. Not sure how well that wood will work in that regard, but it will be interesting to try out.
Derek's (Yxoc) hopper-based house sign also used a casuarina, and I recall him saying it was a bit crumbly. There are so many different ones though that the properties could be completely different.
I have a piece of spotted gum (actually a gum, and the tree is actually spotted) at home I got from Trend, although I'll need to check the thickness and grain orientation. It's certainly very dense... Anagote is on my list of places to check out, since they and Trend are about the same distance from my place.Gadge wrote:Use spotted gum. Probably the best aussie handle material. Can probably get a few pieces from the off cuts bin at Anagote Timbers in Marrickville. Send me a message offline if you need any help finding some.
Iain
- Gadge
- Sweeper of Floors, Maker of Tea
- Location: Sydney, Australia
Post
Re: Rosewood Handles
Chris,
A hammer handle is not the best use for buloke. It's not springy enough and will split reasonably easily. Good for knife handles or decorative work.
Iain,
The spotted gum is hard and a bit difficult to work because of very long fibers which sometimes want to tear out but worth it. I use it on all the handles I replace.
Unfortunately the casuarina won't be hard enough for a dai. It's nice wood though and I'm sure you can find a use for it. I have some black heart tea tree from Tassie which is a perfect wood for dai. Hard and springy and burnishes like Japanese white oak. Lovely honey colour and tight grain.
Gadge
A hammer handle is not the best use for buloke. It's not springy enough and will split reasonably easily. Good for knife handles or decorative work.
Iain,
The spotted gum is hard and a bit difficult to work because of very long fibers which sometimes want to tear out but worth it. I use it on all the handles I replace.
Unfortunately the casuarina won't be hard enough for a dai. It's nice wood though and I'm sure you can find a use for it. I have some black heart tea tree from Tassie which is a perfect wood for dai. Hard and springy and burnishes like Japanese white oak. Lovely honey colour and tight grain.
Gadge
Who is online
Users browsing this forum: No registered users and 2 guests