Kapex Annoyances

If it has an electrical cord it is covered here.
John Whitley
Deshi
Location: Seattle, WA
Posts: 148
Joined: Sun May 04, 2014 8:56 pm

Re: Kapex Annoyances

Mon Aug 21, 2017 7:00 pm

As I plan the new shop, this thread has come back to mind. A table saw with a "small" slider (vs a full panel saw) is a definite possibility, akin to the PK100 Marc mentioned. To date, I've always used an SCM or radial arm saw for initial rough crosscuts, prior to jointing and planing. Are there any disadvantages to using a sliding table saw in this role?
User avatar
Chris Hall
Site Admin
Contact:
Location: Greenfield, Massachusetts
Posts: 2385
Joined: Mon Nov 22, 2010 12:46 pm

Re: Kapex Annoyances

Mon Aug 21, 2017 8:12 pm

The sliding table saw, if it is decently made, is going to be the more precise tool for cross-cutting, however there is obviously an upper length limit, in most situations, for the stock you can safely cut on the table saw. Long pieces, say over 3m in length, are more suited to be cut in some sort of cross-cutting saw, either radial or SCMS. Of course, you would need to have such a saw set up with long support tables to both sides.
User avatar
Brian
Deshi
Posts: 1090
Joined: Sat Nov 29, 2014 11:46 am

Re: Kapex Annoyances

Tue Aug 22, 2017 12:09 pm

I'd stick with the chop saw for rough cutting.
John Whitley
Deshi
Location: Seattle, WA
Posts: 148
Joined: Sun May 04, 2014 8:56 pm

Re: Kapex Annoyances

Tue Aug 22, 2017 6:55 pm

Thanks for the input, Chris and Brian. I'll push forward with designing space for a miter saw, already roughly marked out on my plan.

Return to “Heavy Metal”

Who is online

Users browsing this forum: No registered users and 2 guests