Medicine Cabinets - Build thread

[Brian]

Thanks Chris!

[Chris Hall]

I hope your new blog proves to be a worthwhile and rewarding endeavor. The main thing seems to be consistency. 80% of the blogs out there never get past an entry or two, so you're already ahead.

[Brian]

I hope so as well, so far it's been quite enjoyable to put together. I think it will also be interesting as a point of reference after a few years and hopefully will spark some interest in others. I log a lot of work on sawmill creek, but it gets fairly difficult to track down after some time.

I found your blog some years ago, and safe to say it's had a substantial and very positive impact on my life. So I think this format is very beneficial for the author as well as the reader.

Thanks for the words of encouragement!

[Brian]

Part II on the doors is now ready for general consumption. I hope you will check it out and comment as I am fleshing out my door idea a bit in this post.
https://brianholcombewoodworkerblog.wor ... s-part-ii/

[Brian]

Moving along on the stile in part III

https://brianholcombewoodworkerblog.wor ... -part-iii/

[Chris Hall]

Good post, amd I wish the pictures were bigger or could be clicked on to expand.

One nitpick is the term "sokosari nomi", which should be sokozarai nomi.

[Brian]

Thanks Chris, made some changes. Oddly enough if I upload directly from my phone to their servers then it saves the picture very small, but if I host outside then they come up something closer to full size.

I plan to play around with this and hopefully get it so that they can be clicked on and enlarged to full size.

I added the name Mukoumachi-nomi for the mortise chisels as well, trying to use the correct Japanese word for each tool as often as possible. I believe that is accurate for mortise chisels?

[Chris Hall]

I added the name Mukoumachi-nomi for the mortise chisels as well, trying to use the correct Japanese word for each tool as often as possible. I believe that is accurate for mortise chisels?

Yep, dat is correct.

[Brian]

[Brian]

Evening gents! I've got part four together. Please check it out.

https://brianholcombewoodworkerblog.wor ... s-part-iv/





Cheers
Brian