Heavy metal update
- Chris Hall
- Site Admin
- Contact:
- Location: Greenfield, Massachusetts
- Chris Pyle
- Deshi
- Location: St. Louis, MO
Post
Re: Heavy metal update
I wasn't terribly impressed with Ex-Factory auctions either but that is where I won the Hitachi Cb75f bandsaw. As a counterpoint, I contacted the seller after I received a quote from the Exfactory. Exfactory wanted to charge me roughly $6-700 for shipping and a couple hundred for crate and pallet.
I worked it out with the seller so that I gave him $100 to build the pallet and drop off at Fastenal. Another $100 to have it delivered to me. I won the Hitachi for $500 but with fees and shipping, I ended up paying $825. I found out the blade guide had been repaired so that'll likely be an additional expense but it came with two brand new stelite-tipped blades, so offset $350-400 for that. (which is an incredibly fortunate find)
ExFactory was simply the best option for me because the only other Hitachi near me over the past 3 years, the seller was asking $1700 with a dull blade. Not impressed with ExF's price gauging but sometimes they are still the best option.
Saw a Martin jointer in the NE sell for $5700ish a couple months ago. Wish I could've pulled the trigger at that time.
I worked it out with the seller so that I gave him $100 to build the pallet and drop off at Fastenal. Another $100 to have it delivered to me. I won the Hitachi for $500 but with fees and shipping, I ended up paying $825. I found out the blade guide had been repaired so that'll likely be an additional expense but it came with two brand new stelite-tipped blades, so offset $350-400 for that. (which is an incredibly fortunate find)
ExFactory was simply the best option for me because the only other Hitachi near me over the past 3 years, the seller was asking $1700 with a dull blade. Not impressed with ExF's price gauging but sometimes they are still the best option.
Saw a Martin jointer in the NE sell for $5700ish a couple months ago. Wish I could've pulled the trigger at that time.
- Brian
- Deshi
Post
Re: Heavy metal update
That’s a great deal!
I found them really pushing the crating on me, advice I ignored. I was still able to insure the shipment for full replacement cost for a reasonable amount through u-ship even though I had it loaded onto a pallet. They quoted me very high for crating.
I also contacted the seller but he wanted no part in making a similar arrangement.
I found them really pushing the crating on me, advice I ignored. I was still able to insure the shipment for full replacement cost for a reasonable amount through u-ship even though I had it loaded onto a pallet. They quoted me very high for crating.
I also contacted the seller but he wanted no part in making a similar arrangement.
- Chris Pyle
- Deshi
- Location: St. Louis, MO
Post
I often pay extra to know I'm getting quality because I believe it's important.
As to your auction win, sucks the seller didn't want to help you out. That's the gamble with these types of auctions, you never really know what you're getting or how cooperative they'll be.
Still sounds like you have some great machines being set-up in your shop.
Re: Heavy metal update
It was a great deal but there was a great deal of time spent searching for the deal and waiting. That was all time I could've been working wood and actually progressing in skill. Don't get me wrong, I think it's one of the better deals I've found (along with my jointer) but those things take a lot of time and deals are rare.Brian wrote: ↑Fri Dec 01, 2017 2:03 pmThat’s a great deal!
I found them really pushing the crating on me, advice I ignored. I was still able to insure the shipment for full replacement cost for a reasonable amount through u-ship even though I had it loaded onto a pallet. They quoted me very high for crating.
I also contacted the seller but he wanted no part in making a similar arrangement.
I often pay extra to know I'm getting quality because I believe it's important.
As to your auction win, sucks the seller didn't want to help you out. That's the gamble with these types of auctions, you never really know what you're getting or how cooperative they'll be.
Still sounds like you have some great machines being set-up in your shop.
- Brian
- Deshi
Post
Re: Heavy metal update
The seller in this case was the bank, so they used a local business to do the work. They had an agreement and couldn’t break it, I don’t blame them for sticking to their agreement but was certainly hoping that they wouldn’t ![Smile :)](./images/smilies/icon_e_smile.gif)
I’m any case, certainly happy to have this stuff coming together. It’s been a long time in the plans it seems. Building a kitchen by hand to finance this effort has certainly made these two machines feel both hard earned and very much needed. A few times in this build I felt I pushed myself too near to repetitive movement injury.
![Smile :)](./images/smilies/icon_e_smile.gif)
I’m any case, certainly happy to have this stuff coming together. It’s been a long time in the plans it seems. Building a kitchen by hand to finance this effort has certainly made these two machines feel both hard earned and very much needed. A few times in this build I felt I pushed myself too near to repetitive movement injury.
- Brian
- Deshi
- Chris Hall
- Site Admin
- Contact:
- Location: Greenfield, Massachusetts
Post
Re: Heavy metal update
That is awfully shiny my friend. Congratulations!
Nice to see that the planer has 4 table raise/lower screws.
Nice to see that the planer has 4 table raise/lower screws.
- Brian
- Deshi
Post
Re: Heavy metal update
Thanks Chris! I had originally wanted to go with the elite as opposed to the elite S but once I found that the elite s is much more industrial like with regard to the details I decided to go for the S. I think it is also 400lbs heavier than the elite.
Getting this machine up a sloped driveway was exciting.
Getting this machine up a sloped driveway was exciting.
- Brian
- Deshi
Post
Re: Heavy metal update
Super happy with the rotary phase converter, it’s amazingly quiet.
Also happy to finally fire up the mortiser. Pretty happy with it, can’t wait to get the hollow chisel attachment.
Also happy to finally fire up the mortiser. Pretty happy with it, can’t wait to get the hollow chisel attachment.
- Chris Hall
- Site Admin
- Contact:
- Location: Greenfield, Massachusetts
Who is online
Users browsing this forum: No registered users and 72 guests